The following is the formula used to calculate Swinging Radius of a boat at anchor.:   

 Swinging Radius = LOA + [ ( RODE ) 2 - ( DEPTH + FREEBOARD)2 ] 1/2

LOA:  Overall length of the boat, including any additions or extensions from the stern

RODE:  The length (line to the anchor) of the rode from the bow pulpit to the anchor.

DEPTH:  The water depth over the anchor.

FREEBOARD:  The distance from the deck at the bow pulpit to the water.

Note all measurements of length and distance must be in the same units.

The values determined from this calculator should be used for educational purposes only.   This calculator should not be used in determining the suitability of purchase, charter or passage on a boat.  Instead the manufacturer should be contacted to obtain the boat's characteristics.

Adapted From:  Rousmaniere, John   The Annapolis Book of Seamanship   Boat Selection.   Chapter 14   p315   Simon & Schuster,  New York, New York.

             

Copyright  2001  All Rights Reserved