The following is the formula used to calculate The Sail Area Wind Load:   

 Sail Wind Load = SA * ( WS ) 2 * 0.00431

SA:  Sail Area in Square Feet.

WS:  Wind Speed in Knots

To determine the force needed to operate a winch in this wind condition.  Divide the Sail Wind Load by the gear ratio ( GA ) of the winch and by the ratio of the winch's radius ( WR ) ( or the winch's diameter divided by 2 ) to the winch handle's length ( WHL ).

Force to Operate a Winch = Sail Wind Load  / ( GA* ( WHL / WR )

The values determined from this calculator should be used for educational purposes only.   This calculator should not be used in determining the suitability of purchase, charter or passage on a boat.  Instead the manufacturer should be contacted to obtain the boat's characteristics.

Adapted From:  Rousmaniere, John   The Annapolis Book of Seamanship   Boat Selection.   Chapter 1   p35   Simon & Schuster,  New York, New York.

              

Copyright  2001  All Rights Reserved